AIRNAMIC

Square face style with square plenum box

Circular face style with circular plenum box

Circular swirl diffuser with spigot for connection to a vertical duct

Gently sloped, flat border (shown in a continuous ceiling)

Three-dimensional blade contour

AIRNAMIC

For the most demanding requirements of technical function, comfort, and design

Circular and square ceiling swirl diffusers with fixed air control blades, for high volume flow rates at low sound power levels and low differential pressure due to innovative polymer technology

Nominal sizes 160, 250, 300, 400, 600, 625
Volume flow rate range 5 – 385 l/s or 16 – 1386 m³/h
Plastic diffuser face with overlapping, three-dimensionally contoured blades, for the most efficient swirl and high induction
For supply and extract air
For variable and constant volume flows
For all types of ceiling systems, and with an extended border also suitable for freely suspended installation
Diffuser face with gently sloped, flat border – only 3 mm high
Plenum box with acoustically optimised and lockable damper blade
Spigot for nominal sizes 160 and 250 allows for quick, simple and direct connection to the ductwork
Diffuser face with bayonet fixing (no tools required) available for nominal size 160 or 250 and with a spigot

Optional equipment and accessories

Exposed diffuser face available in RAL CLASSIC colours

Initialize order code

General information

Application

Ceiling swirl diffusers are used as supply air or extract air diffusers for comfort zones

Attractive design element for building owners and architects with demanding aesthetic requirements
Horizontal swirling supply air discharge for mixed flow ventilation
The efficient swirl creates high induction levels, thereby rapidly reducing the temperature difference and airflow velocity (supply air variant)
For variable and constant volume flows
For supply air to room air temperature differences from -12 – +10 K
For room heights up to 4 m (lower edge of suspended ceiling)
For all types of ceiling systems
With an extended border also suitable for freely suspended installation (supply air variant)

Special features

Plastic diffuser face with overlapping, three-dimensionally profiled blades, for the most efficient swirl and high induction

For all types of ceiling systems, and with an extended border also suitable for freely suspended installation

Diffuser face with gently sloped, flat border – only 3 mm high

Plenum box with side entry spigot, for supply air, with an optimised equalising element that ensures a uniform airflow through the diffuser face

Vertical spigot for nominal sizes 160 and 250

Diffuser face with bayonet fixing (no tools required) available for nominal size 160 or 250 and with a spigot

Nominal sizes

Q: 300L, 300H, 600, 625

R: 160, 250, 400L, 400H, 600

Variants

AIRNAMIC-Q: square diffuser face with rectangular plenum box (nominal sizes 300, 600 and 625)
AIRNAMIC-R: circular diffuser face with circular plenum box (nominal sizes 250, 400 and 600) or spigot (nominal sizes 160 and 250)
AIRNAMIC-*-Z: Supply air
AIRNAMIC-*-A: Extract air

Connection

Horizontal duct connection
Vertical (direct) duct connection

Construction features

Spigot suitable for circular ducts to EN 1506 or EN 13180

Square plenum boxes with horizontal spigot for nominal sizes 300, 300L, 600H and 625

Spigot made of black ABS
Spigots are fitted with a groove for a lip seal
Lip seal and damper blade are factory fitted
Plenum box for supply air, with an optimised equalising element that ensures a uniform airflow through the diffuser face
Simple installation of the diffuser face due to central fixing screw with cap

Circular plenum boxes with horizontal spigot for nominal sizes 250, 400L, 400H and 600

Spigot made of black ABS
Spigots are fitted with a groove for a lip seal
Retrofitting of the lip seal is possible at a later stage
Damper blade and lip seal (optional) are factory fitted
Plenum box for supply air, with an optimised equalising element that ensures a uniform airflow through the diffuser face
Simple installation of the diffuser face due to central fixing screw with cap

Spigot for nominal sizes 160 and 250 and vertical connection to the ductwork

Spigot made of black ABS
Diffuser face fixing with bayonet, no tools required
Particularly suitable for installation into continuous ceilings

Materials and surfaces

Diffuser face, spigot and damper blade made of ABS plastic, UL 94, V-0, flame retardant

Plenum box and cross bar made of galvanised sheet steel

Equalising element made of polyester

Diffuser face coated RAL 9010, pure white

P1: Painted, RAL CLASSIC colour

Standards and guidelines

Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

Low maintenance as construction and materials are not subject to wear

Inspection and cleaning to VDI 6022

Technical information

Function, Technical data, Quick sizing, Specification text, Order code

Schematic illustration of AIRNAMIC, with plenum box for horizontal duct connection

① Diffuser face

② Central fixing screw with decorative cap

③ Plenum box

④ Cross bar

⑤ Equalising element (Z: for supply air)

⑥ Suspension lug

⑦ Spigot

⑧ Double lip seal

⑨ Damper blade for volume flow rate balancing

Ceiling swirl diffusers in air conditioning systems create a swirl to supply air to rooms. The resulting airflow induces high levels of room air, thereby rapidly reducing the airflow velocity and the temperature difference between supply air and room air. Ceiling swirl diffusers allow for large volume flow rates. The result is a mixed flow ventilation in comfort zones, with good overall room ventilation, creating only very little turbulence in the occupied zone.

Type AIRNAMIC ceiling swirl diffusers have fixed blades with three-dimensionally profiled contours. This allows for high volume flow rates and low sound power levels. The supply air to room air temperature difference can range from -10 to +10 K.

A damper blade simplifies volume flow rate balancing for commissioning.

To give rooms an aesthetic, uniform look, Type AIRNAMIC diffusers may also be used for extract air. There is then no equalising element.

Nominal sizes	160, 250, 300, 400, 600, 625 mm
Minimum volume flow rate, with Δt_z = -6 K	5 – 76 l/s or 16 – 274 m³/h
Maximum volume flow rate, with LWA ≅ 50 dB(A)	44 – 385 l/s or 159 – 1386 m³/h
Supply air to room air temperature difference	-12 – 10 K

The quick sizing tables give a good overview of the volume flow rates and the corresponding sound power levels and differential pressures. The minimum volume flow rates apply to a supply air to room air temperature difference of -6 K. The maximum volume flow rates apply to a sound power level of approx. 50 dB (A) with damper blade position 0°. Exact values for all parameters can be determined with our Easy Product Finder design program.

AIRNAMIC-Q-Z-H (supply air) soundpower level and total differential pressure

NS	qv [l/s]	qv [m³/h]	0°		45°		90°
NS	qv [l/s]	qv [m³/h]	Δpₜ [Pa]	LWA [dB(A)]	Δpₜ [Pa]	LWA [dB(A)]	Δpₜ [Pa]	LWA [dB(A)]
300L	13	47	1	<15	2	<15	2	<15
300L	40	144	9	24	16	24	23	24
300L	68	245	27	37	45	38	65	39
300L	95	342	539	50	89	51	127	51
300H	16	58	1	<15	2	<15	4	<15
300H	55	198	15	22	27	24	41	27
300H	130	468	86	50	150	51	232	54
600, 625	76	274	3	<15	7	<15	13	18
600, 625	180	648	18	24	41	31	72	41
600, 625	285	1026	44	40	102	47	180	58
600, 625	385	1386	80	50	185	59	329	71
300H	90	324	41	37	72	39	111	42

0°, 45°, 90°: Damper blade position

AIRNAMIC-R-Z-H (supply air), sound power level and total differential pressure

NS	qv [l/s]	qv [m³/h]	0°		45°		90°
NS	qv [l/s]	qv [m³/h]	Δpt [Pa]	LWA [dB(A)]	Δpt [Pa]	LWA [dB(A)]	Δpt [Pa]	LWA [dB(A)]
250	12	42	2	<15	2	<15	2	<15
250	42	152	20	29	25	29	32	29
250	73	262	59	42	75	42	95	42
250	103	373	119	50	151	50	191	50
400L	17	61	1	<15	1	<15	2	<15
400L	55	198	9	25	14	25	20	29
400L	95	342	27	38	41	39	59	41
400L	135	486	55	50	82	51	118	52
400H	24	86	1	<15	2	<15	4	<15
400H	75	270	14	26	21	28	34	28
400H	130	468	41	40	64	40	101	44
400H	180	648	79	50	123	50	193	54
600, 625	57	205	2	<15	4	<15	8	<15
600, 625	160	576	17	27	35	28	60	36
600, 625	265	954	47	40	97	45	163	54
600, 625	365	1314	89	50	185	58	310	66

0°, 45°, 90°: Damper blade position

AIRNAMIC-R-Z-V (supply air), sound power level and total differential pressure

NS	qv [l/s]	qv [m³/h]	Δpₜ [Pa]	LWA [dB(A)]
160	5	16	1	<15
160	18	64	13	26
160	31	111	39	40
160	44	159	80	50
250	12	42	1	<15
250	44	159	11	24
250	77	277	33	40
250	109	394	68	50

Specification text

Ceiling swirl diffusers with square or circular diffuser face, for comfort zones with particularly demanding requirements of aesthetics and design. Supply air and extract air variants. Excellent aerodynamic and acoustic function due to air control blades with optimised aerofoil contours, for horizontal swirling air discharge, creating high levels of induction. For installation into all types of suspended ceilings. Ready-to-install component that consists of a diffuser face with either a plenum box or a spigot. Plenum box with horizontal spigot, cross bar and either drilled holes or suspension lugs, with a damper blade for volume flow rate balancing and a lip seal on the spigot, supply air spigot with equalising element. Alternatively, spigot for nominal sizes 160 and 250 for the direct connection to ductwork, diffuser face fixing without any tools. The diffuser face can be fixed to the cross bar with a central screw, concealed with a cap. Spigots are suitable for ducting according to EN 1506 or EN 13180. Sound power level of the air-regenerated noise measured according to EN ISO 5135.

Special features

Plastic diffuser face with overlapping, three-dimensionally profiled blades, for the most efficient swirl and high induction

For all types of ceiling systems, and with an extended border also suitable for freely suspended installation

Diffuser face with gently sloped, flat border – only 3 mm high

Plenum box with side entry spigot, for supply air, with an optimised equalising element that ensures a uniform airflow through the diffuser face

Vertical spigot for nominal sizes 160 and 250

Diffuser face with bayonet fixing (no tools required) available for nominal size 160 or 250 and with a spigot

Materials and surfaces

Diffuser face, spigot and damper blade made of ABS plastic, UL 94, V-0, flame retardant

Plenum box and cross bar made of galvanised sheet steel

Equalising element made of polyester

Diffuser face coated RAL 9010, pure white

P1: Painted, RAL CLASSIC colour

Technical data

Nominal size: 160, 250, 300, 400, 600, 625 mm

Minimum volume flow rate, with Δt_z = -6 K: 5 – 76 l/s or 16 – 102 m³/h

Maximum volume flow rate, with LWA ≅ 50 dB(A): 44 – 385 l/s or 159 – 1386 m³/h

Supply air to room air temperature difference: -12 to +10 K

AIRNAMIC	–	R	–	Z	–	H	/	400H	/	S1 – RAL…
\|		\|		\|		\|		\|		\|
1		2		3		4		5		6

1 Type
AIRNAMIC Swirl diffuser

2 Construction style
Determines the variant of the plenum box
R Circular
Q Square

3 System
Z Supply air
A Extract air

4 Connection
V vertical
H horizontal

5 Nominal size [mm]
Construction style R
160, 250, 400L, 400H, 600

Construction style Q
300L, 300H, 600, 625

L – low volume flow rate
H – high volume flow rate

6 Surface
No entry: painted, RAL 9010 (pure white)
S1 Painted, specify RAL CLASSIC colour

Order example: AIRNAMIC–R–Z-H/400H

Style	Circular
Air conditioning system	Supply air
Connection	horizontal
Nominal size	400H
Surface	RAL 9010, pure white

Variants, Dimensions, Product details

AIRNAMIC-Q/600

Variant

Ceiling swirl diffuser with square diffuser face
With plenum box for horizontal duct connection

Nominal sizes

300L, 300H, 600, 625

Parts and characteristics

Square diffuser face
Plenum box for horizontal duct connection
Square opening to accommodate the diffuser face
Optimised equalising element that ensures a uniform airflow through the diffuser face (supply air variant)
Damper unit for volume flow rate balancing, can be set in 15° intervals between 0 and 90°
Spigot with double lip seal
Simple installation of the diffuser face due to central fixing screw with decorative cap

Construction features

Spigot suitable for circular ducts to EN 1506 or EN 13180
Spigot with double lip seal

AIRNAMIC-R/600

Variant

Ceiling swirl diffuser with circular diffuser face
With plenum box for connection to a horizontal duct, nominal size 250 – 600

With spigot for connection to a vertical duct, nominal sizes 160 and 250

Nominal sizes

160, 250, 400L, 400H, 600

Parts and characteristics

Circular diffuser face
Gently sloped, flat border, only 3 mm high
Sizes 160 and 250 are prepared for fixing with bayonet (with spigot) or with a central fixing screw
Sizes 400 and 600 are prepared for fixing with a central fixing screw (eventually concealed with a cap)

Plenum box for horizontal duct connection

Plenum box with a circular opening to accommodate the diffuser face
Optimised equalising element that ensures a uniform airflow through the diffuser face (supply air variant)
Damper blade for volume flow rate balancing, can be set in 15° intervals between 0 and 90°
Spigot with double lip seal
Simple installation of the diffuser face due to central fixing screw

Spigot for connection to a vertical duct

Diffuser face with bayonet for fixing it to the spigot (no tools required)
Spigot with 3 fixing points for fixing it to the ceiling

Construction features

Spigot suitable for circular ducts to EN 1506 or EN 13180
Spigot on the plenum box with double lip seal

AIRNAMIC-Q with plenum box for horizontal duct connection

AIRNAMIC-Q-*-H

NS	□Q₁	H₁	□Q₃	H₃	∅D	A	C	①	m [kg]
300L	298	3	290	250	158	139	60	AK-H-Q/300	3
300H	298	3	290	250	158	139	60	AK-H-Q/300	3
600	598	3	567	345	248	194	60	AK-H-Q/600	8.7
625	623	3	567	345	248	194	60	AK-H-Q/600	8.7

① Plenum box
Weights apply to the supply air variant.

AIRNAMIC-R-*-H

NS	ØD₁	H₁	ØD₃	H₃	ØD	A	C	①	m [kg]
NS	ØD₁	H₁	ØD₃	H₃	ØD	A	C	①	m [kg]
250	250	3	274	293	158	189	60	AKR1*	2.4
400L	400	3	362	290	198	166	60	AKR2	4
400H	400	3	362	290	198	166	60	AKR2	4
600	600	3	573	344	248	195	60	AKR5	7.5

① Plenum box
* AIRNAMIC 250 is fitted with a transition piece.
Weights apply to the supply air variant.

AIRNAMIC-R-*-V

NS	ØD₁	H₁	ØD₃	H₃	ØD₄	A₁	ØD	C
NS	ØD₁	H₁	ØD₃	H₃	ØD₄	A₁	ØD	C
160	160	3	144	117	146	0.5 – 30	98	50
250	250	3	222	117	225	0.5 – 30	158	50

ØD4 is the size of the installation opening, which can be made with a hole saw, for example.

AIRNAMIC-Q

NS	□Q₂	□Q₁	A_eff [m²]
300L	262	298	0.0139
300H	262	298	0.0175
600	539	598	0.0616
625	539	623	0.0616

AIRNAMIC-R

NS	∅D₁	∅D₂	A_eff [m²]
160	160	132	0.0036
250	250	210	0.0098
400L	400	352	0.0186
400H	400	352	0.0258
600	600	546	0.0504

Installation in T-bar ceilings

Innovation

Type AIRNAMIC swirl diffusers meet the most demanding requirements of technical function, comfort, and design. The unique design of the air control blades, a specially developed equalising element, and the innovative plenum box result in high volume flow rates, a low sound power level and low differential pressure. The air control blades have three-dimensionally profiled contours to create an efficient swirl. As a consequence, the airflow velocities and temperature differences in the occupied zone are very low, and the level of comfort is excellent. The production of these unusually contoured blades is only possible by the use of high-quality plastics and by applying innovative production technology.

The exceptionally aesthetic air control blades allow for perfect architectural integration of the circular or square swirl diffuser and therefore make for an important design element for building owners and architects. A spigot with double lip seal provides a low-leakage connection of the plenum box to the ducting, and a lockable damper blade for volume flow rate balancing simplifies commissioning.

Installation and commissioning

Preferably for rooms with a clear height up to 4.0 m
Flush ceiling installation
Freely suspended installation only with an extended border (supply air variant)
If necessary, carry out volume flow rate balancing with the damper blade

Note: These are schematic diagrams to illustrate the installation details.

Volume flow rate balancing

When several diffusers are connected to just one volume flow controller, it may be necessary to balance the volume flow rates.

The diffuser face can be removed to access the damper blade; the damper blade can then be set in 15° intervals between 0 and 90°

Downloads

product information

brochures

Quiet. Lightweight. Elegant. - Airnamic

AIRNAMIC_SF_2022_02_DE_en_web Sales Brochure 1,5 MB pdf

certificates

Declaration of hygiene conformity Type AIRNAMIC

AIRNAMIC_HC_2024_05_DE_en Hygiene certificate 1,6 MB pdf
Non-CE Manufacturer's statement AIRNAMIC

AIRNAMIC_NotCE_2022_02_08_14_22_20_DE_en Certificate 1,6 MB pdf

operation manuals

Installation manual Air terminal devices

IM_2018_06_A00000054447 Installation manual 1,2 MB pdf

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

NS	qv [l/s]	qv [m³/h]	Δpₜ [Pa]	LWA [dB(A)]
160	5	16	1	<15
160	18	64	13	26
160	31	111	39	40
160	44	159	80	50
250	12	42	1	<15
250	44	159	11	24
250	77	277	33	40
250	109	394	68	50

NS	qv [l/s]	qv [m³/h]	Δpₜ [Pa]	LWA [dB(A)]
160	5	16	1	<15
160	18	64	13	26
160	31	111	39	40
160	44	159	80	50
250	12	42	1	<15
250	44	159	11	24
250	77	277	33	40
250	109	394	68	50

AIRNAMIC

For the most demanding requirements of technical function, comfort, and design

General information

Technical information

Function, Technical data, Quick sizing, Specification text, Order code

Variants, Dimensions, Product details

Downloads

product information

brochures

Quiet. Lightweight. Elegant. - Airnamic

certificates

Declaration of hygiene conformity Type AIRNAMIC

Non-CE Manufacturer's statement AIRNAMIC

operation manuals

Installation manual Air terminal devices

VIDEO

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE

NS	qv [l/s]	qv [m³/h]	Δpₜ [Pa]	LWA [dB(A)]
160	5	16	1	<15
160	18	64	13	26
160	31	111	39	40
160	44	159	80	50
250	12	42	1	<15
250	44	159	11	24
250	77	277	33	40
250	109	394	68	50