00134952_0
Control panel UP (flush mounted)


00134968_0
Straight-way valve


00134974_0
Valve actuator


00134948_0
Control panel AP (surface mounted)


00134952_0
Control panel UP (flush mounted)


00134952_0
00134968_0
00134974_0
00134948_0
00134952_0

LWS control equipment

Stand-alone single room control equipment to control the water-side components in air-water systems

Compact, easy-to-operate control panel, used with air-water systems (2-pipe or 4-pipe systems) and the connected valves and actuators to control the room temperature

  • Control panel for surface mounting or flush mounting, including control unit and room temperature sensor
  • Self-explanatory push buttons
  • Backlit LC display
  • Temperature is displayed in °C or °F
  • 2-point or 3-point outputs
  • Valve with valve actuator, normally closed
  • Control valves with G½" external thread and flat seal
  • 230 V AC supply voltage


Optional equipment and accessories

  • 7-day timer
  • KNX or Modbus interface to the central BMS
  • Amplifier, required if a control panel is used for the control of more than four induction units in a heating or cooling circuit

Application

Application

  • Room control panel to be used in combination with air-water systems, e.g. induction units
  • Control of the water circuits for heating and/or cooling a room
  • Controller for surface mounting or flush mounting with optional timer as a bespoke solution for project-specific installation situations

Special characteristics

  • Control panels for surface mounting or flush mounting
  • Optional timer
  • Valve with valve actuator, normally closed
  • Valves with G½" external thread and flat seal
  • Valves can be used for up to PN 16
  • Connecting cable for valve actuator is available in various lengths (1.0 m as standard)
  • Valve actuator with bayonet fixing

Nominal sizes

  • RDGxxx: 128 × 93 × 31 mm (H × B × T)
  • RDFxxx : 86 × 86 × 14 mm (H × B × T), visible part; total depth: 57 mm

Description

Components

  • RDG100 - Surface mounted controller without timer
  • RDG100T - Surface mounted controller with timer
  • RDF600 - Flush mounted controller without timer
  • RDF600T - Flush mounted controller with timer
  • VVP47.10-x.xx - straight-way valve (KVS 0.25; 0.4; 0.63 or 1.0)
  • Electro-thermal actuator, including valve adapter for straight-way valve VVP 47.10-x.xx
  • Lockshield

Construction

  • Casing in RAL 9003, signal white

Accessories

  • Amplifier (required if a control panel is used for the control of more than four induction units)

Maintenance

  • Maintenance-free as construction and materials are not subject to wear

Technical information

Function, Technical data, Specification text, Order code, Related products

  • Function
  • Technical data
  • Specification text
  • Order code
Schematic illustration of the control system 00258972_0


Functional description

The controller thermostat uses either the integral temperature sensor or an external temperature sensor to maintain the setpoint temperature for the room.

Operating modes can be set manually, using the push buttons, or automatically, using the timer.

Two or three multifunctional inputs enable the connection of additional components.

Operating voltage

230 V AC (+10/–15%)

Frequency

50/60 Hz

Power consumption

Max. 18 VA (RDG 100), max. 8 VA (RDF 600)

Control outputs

230 V AC, 1 A max.


Compact, easy-to-operate control panel for surface mounting or flush mounting, with integral controller, for use with air-water systems and to control the water-side components.


Components
  • RDG100 - Surface mounted controller without timer
  • RDG100T - Surface mounted controller with timer
  • RDF600 - Flush mounted controller without timer
  • RDF600T - Flush mounted controller with timer
  • VVP47.10-x.xx - straight-way valve (KVS 0.25; 0.4; 0.63 or 1.0)
  • Electro-thermal actuator (NO or NC), including valve adapter for straight-way valve VVP 47.10-x.xx
  • Lockshield

Special characteristics

  • Control panels for surface mounting or flush mounting
  • Optional timer
  • Valve with valve actuator, normally closed
  • Valves with G½" external thread and flat seal
  • Valves can be used for up to PN 16
  • Connecting cable for valve actuator is available in various lengths (1.0 m as standard)
  • Valve actuator with bayonet fixing

Construction

  • Casing in RAL 9003, signal white

Technical data

  • Supply voltage: 230 V AC (+10/–15 %)
  • Frequency: 50/60 Hz
  • Power consumption: Max. 18 VA (RDG 100), max. 8 VA (RDF 600)
  • Control outputs: 230 V AC, 1 A max.

This specification text describes the general properties of the product.

 

Variants

  • Variants

Installation details

  • Installation details

Installation and commissioning

  • For surface mounting (RDGxxx) or flush mounting (RDFxxx)
  • The controller should be mounted approx. 1.5 m above the floor
  • Select an installation location where the control equipment is not affected by disturbances (e.g. solar gain, heating).
  • Set the application using a DIP switch and before mounting the control equipment

Downloads

product information

operation manuals

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +32(0)2 522 07 80 | E-mail: info@trox.be

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +32(0)2 522 07 80 | E-mail: info@trox.be

Contact

We are here for you

Please specify your message and type of request.
Tel.: +32(0)2 522 07 80 | E-mail: info@trox.be

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +32(0)2 522 07 80 | E-mail: info@trox.be