Top entry circular spigot
Top entry circular spigot
Aerosol feed
Low-leakage shut-off damper, manually adjustable
Damper blade for volume flow rate balancing
Tested to VDI 6022
Ceiling mounted particulate filters as a final filter stage with Mini Pleat filter panels for the separation of suspended particles. Used in medicine, biology, the pharmaceuticals industry, and sensitive technical areas.
Application
Special characteristics
Classification
SC, SCH, SCV, SCM, SCD, SCA, TC, TCM, TCA, SR
Nominal sizes
Constructions
Casing material
Classification
SC, SCH, SCV, SCM, SCD, SCA, TC, TCM, TCA, SR
1 Casing
2 Fixing bracket
3 Spigot with lip seal
4 Internal measuring tube
5 Air terminal device
6 Clamping mechanism for the filter element
7 Clamping screws
8 Filter element
9 Filter fitting
10 Pressure measurement point
Specification text
Particulate filter air terminal device type TFC for ceiling installation as final filter stage and for air distribution. Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply or extract air. Casing with side entry or top entry circular spigot or with side entry rectangular spigot. As standard, ceiling mounted particulate filters with circular spigots are fitted with a lip seal. Choice of different constructions: low-leakage ('air-tight') shut-off damper, either manually adjustable or with electric actuator; volume flow limiter; damper blade for volume flow rate balancing; recessed side entry spigot; or aerosol feed. Casing without test groove for filters with flat seal, continuous foam seal or gel seal; casing with test groove as an option for filters with flat seal. Filter depths from 78 to 150 mm. Sheet steel casing with RAL 9010 powder coating; stainless steel as an option. Casing and diffuser are suitable for installation into commercially available plasterboard and mineral fibre ceilings as well as in walk-on ceiling systems. Installation into clip-in tile ceilings is also possible (optional). External diffuser as standard, internal diffuser as an option for flush installation. Fixing on the cross bar with central screw and spring; can be removed so that the filter (downstream side) can be checked. The filter elements are pressed into place by an installation subframe with four clamping screws. As standard, the casings are fitted with an internal measuring tube and pressure measurement points for monitoring the differential operating pressure. As standard, the pressure measurement points are at the top, optionally at the side; in case of false ceiling installation the measurement points are at the top. For the fitting of Mini Pleat filer panels with flat seal, continuous foam seal or gel seal. Leakage test for each casing. Leakage class L1 to EN 1886; leakage class D to EN 15727.
Variants
Air terminal devices
Life cycle assessment
A life cycle assessment is available for the product series in form of an Environmental Product Declaration (EPD) that has been checked and published by a programme holder.
| TFC | – | SC | – | CF | – | SPC | – | CC | – | ID | – | VDWF | / | 600 × 24 | – | 248 | – | 20 | / | T |
| | | | | | | | | | | | | | | | | | | | | | | ||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| Type | TFC |
| Variant | Side entry circular spigot |
| Filter fitting and construction | Filter with continuous seal and flat seal (frame depths 78 – 90 mm) |
| Casing material | Steel, powder-coated, RAL 9010 (pure white) |
| Type of ceiling | Clip-in tile ceiling |
| Position of air terminal device | Internal diffuser |
| Air terminal device | VDWF |
| Nominal size [mm] | 600 × 24 blades |
| Spigot size [mm] | Ø 248 |
| Flange width [mm] | 20 |
| Suspension/measurement points | Suspension and measurement points at the top |
Application
Variants, overview
,
Application
Application
Application
Application
Application
Application
Application
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +32(0)2 522 07 80 | E-mail: info@trox.be
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +32(0)2 522 07 80 | E-mail: info@trox.be
Contact
We are here for you
Please specify your message and type of request.
Tel.: +32(0)2 522 07 80 | E-mail: info@trox.be
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +32(0)2 522 07 80 | E-mail: info@trox.be
