FV-EU

Application

• Fire protection valves of Type FV-EU, with CE marking and declaration of performance, for the isolation of duct penetrations between fire compartments in the event of a fire
• To prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments

Special characteristics

• Declaration of performance according to Construction Products Regulation
• Classification to EN 13501-3, up to EI 120 (v_e, h_o, i ↔ o) S
• Building inspectorate licence Z-56.4212-991 for fire resistance properties
• Complies with the requirements of EN 15650
• Tested to EN 1366-2 for fire resistance properties
• Hygiene complies with VDI 6022 part 1 (07/2011), VDI 3803 (10/2002), DIN 1946 part 4 (12/2008), and EN 13779 (09/2007)
• Corrosion protection according to EN 15650 in connection with EN 60068-2-52
• Closed valve cone air leakage to EN 1751, class 2
• Low differential pressure and sound power level
• Any airflow direction

Classification

• Class of performance to EN 13501-3, up to EI 120 (v_e, h_o, i ↔ o) S

Nominal sizes

• Ø100, 125, 160, 200 mm
• L: 150 mm

Variants

• With fusible link
• With fusible link and limit switch

Attachments

• Limit switch for capturing the valve position
• Network module for the integration with AS-i networks

Accessories

Mortar-based installation

• Trim ring, circular
• Trim ring, square
• Flexible connectors
• Extension piece

Construction features

• Adjustment device for large or small air volumes
• Valve cone with bayonet fixing
• Integration into the central BMS with TROXNETCOM

Materials and surfaces

• Installation subframe, spigot and valve disc made of sheet steel
• Installation subframe and spigot with stove-enamelled finish, black
• Exposed surface of valve disc powder-coated RAL 9010
• Valve cone made of special insulation material
• Seal made of polyurethane
• Attachments made of galvanised steel
• Increased corrosion protection due to powder-coated casing

Standards and guidelines

• Construction Products Regulation
• EN 15650:2010 Ventilation for buildings – fire dampers
• EN 1366-2-1999 Fire resistance tests for service installations – Fire dampers
• EN 13501-3:2010 Fire classification of construction products and building elements
• EN 1751:1999 Ventilation for buildings – Air terminal devices

Maintenance

• The functional reliability of the fire protection valve must be tested at least every six months; this has to be arranged by the owner of the ventilation system; functional tests must be carried out in compliance with the basic maintenance principles stated in EN 13306 and DIN 31051. If two consecutive tests, one 6 months after the other, are successful, the next test can be conducted one year later.
• Fire protection valves must be included in the regular cleaning schedule of the ventilation system
• For details on maintenance and inspection refer to the installation and operating manual