Min/Max actoators

Stellantrieb LM24A-F

SERVOMOTEURS MIN/MAX

FOR CONSTANT VOLUME FLOWS WITH VMIN/VMAX SWITCHING IN AIR CONDITIONING SYSTEMS

Actuators for mechanical self-powered CAV controllers Type EN, RN, or VFC, and for flow adjustment dampers Type VFR

Switching between two volume flow setpoint values, e.g. for daytime and night-time operation
Supply voltage 24 V AC/DC or 230 V AC
Control input signal: 1-wire control or 2-wire control (3-point)
Potentiometer or mechanical stops
Positive lock connection with CAV controller
Retrofit possible

Application

Application

Actuators for min/max switching
Switching between volume flow setpoint values of mechanical self-powered CAV controllers Type RN, EN or VFC
Change of the damper blade positions of flow adjustment dampers Type VFR

Description

Parts and characteristics

Potentiometer or mechanical stops for setting the volume flow rate setpoints
Supply voltage 24 V AC/DC or 230 V AC
Overload protection
1-wire control or 2-wire control (3-point)
Optional auxiliary switch for capturing the end positions

Information technique

Function, Technical data

1-Draht-Steuerung

Schalterfunktionen
S1 geöffnet: Drehrichtung 1
S1 geschlossen: Drehrichtung 2

Functional description

The actuator moves a damper blade or a damper blade mechanism to the minimum or maximum position.

Minimum and maximum positions can be set on potentiometers or using mechanical stops.

1-wire control or 2-wire control (3-point) can be used.

1-wire control is actually an open/close control or min/max control.

Control options and effect of actuator action in case of factory setting

Order code detail	Function	Control	Direction of rotation
Order code detail	Function	Control	1	2
B50, B52	Min/Max	1-wire control, 2-wire control	V_min	V_max
B60, B62	Min/Max	1-wire control, 2-wire control	V_min	V_max
E01	Min/Max	1-wire control, 2-wire control	V_min	V_max
E02	Min/Max	1-wire control, 2-wire control	V_min	V_max
M01	Min/Max	1-wire control, 2-wire control	V_max	V_min
M02	Min/Max	1-wire control, 2-wire control	V_max	V_min

Actuators LM24A and LM24A-F

Supply voltage (AC)	24 V AC ± 20 %, 50/60 Hz
Supply voltage (DC)	24 V DC ± 20 %
Power consumption – load	1 W
Power consumption – idle	0.2 W
Power rating	1.5 VA
Torque	5 Nm
Running time for 90°	150 s
Control input signal	1-wire control or 2-wire control (3-point)
Connecting cable	3 × 0.75 mm², 1 m long
IEC protection class	III (protective extra-low voltage)
Protection level	IP 54
EC conformity	EMC to 2014/30/EU, RoHS to 2011/65/EU
Operating temperature	–30 to 50 °C
Weight	0.5 kg

Actuator LM230A and LM230A-F

Supply voltage	100 – 240 V AC –15 % +10 %, 50/60 Hz
Power consumption – load	1.5 W
Power consumption – idle	0.5 W
Power rating	3.5 VA
Torque	5 Nm
Running time for 90°	150 s
Control input signal	1-wire control or 2-wire control (3-point)
Connecting cable	3 × 0.75 mm², 1 m long
IEC protection class	II (protective insulation)
Protection level	IP 54
EC conformity	EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU
Operating temperature	–30 to 50 °C
Weight	0.5 kg

Auxiliary switch S2A

Type of contact	2 changeover contacts¹⁾
Max. switching voltage (AC)	250 V AC
Max. switching current (AC)	3 A (resistive load); 0.5 A (inductive load)
Max. switching voltage (DC)	110 V DC
Max. switching current (DC)	0.5 A (resistive load); 0.2 A (inductive load)
Connecting cable	6 × 0.75 mm², 1 m long
IEC protection class	II (protective insulation)
Protection level	IP 54
EC conformity	EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU
Operating temperature	–30 to 50 °C
Weight	0.250 kg

¹⁾ If both auxiliary switches are used the switching voltages must be the same

Actuator 224-24-03-001

Supply voltage (AC)	24 V AC ± 20 %, 50/60 Hz
Supply voltage (DC)	24 V DC ± 20 %
Power rating (AC)	4.5 VA
Power rating (DC)	3 W
Torque	2.5 Nm
Running time for 90°	20 – 60 s
Control input signal	1-wire control or 2-wire control (3-point)
Connecting cable	3 × 0.75 mm², 1 m long
IEC protection class	III (protective extra-low voltage)
Protection level	IP 42
EC conformity	EMC to 2014/30/EU, RoHS to 2011/65/EU
Operating temperature	0 to 50 °C
Weight	0.32 kg

Actuator CM24-F

Supply voltage (AC)	24 V AC ± 20 %, 50/60 Hz
Supply voltage (DC)	24 V DC ± 20 %
Power rating (AC)	1 VA max.
Power rating (DC)	0.5 W max.
Torque	2 Nm
Running time for 90°	75 s
Control input signal	1-wire control or 2-wire control (3-point)
Connecting cable	3 × 0.75 mm², 1 m long
IEC protection class	III (protective extra-low voltage)
Protection level	IP 54
EC conformity	EMC to 2014/30/EU, RoHS to 2011/65/EU
Operating temperature	–30 to 50 °C
Weight	0.185 kg

Actuator 224-230-03-002

Supply voltage	230 V AC, 50/60 Hz
Power rating	4.5 VA
Torque	2.5 Nm
Running time for 90°	20 – 60 s
Control input signal	1-wire control or 2-wire control (3-point)
Connecting cable	3 × 0.75 mm², 1 m long
IEC protection class	II (protective insulation)
Protection level	IP 42
EC conformity	EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU
Operating temperature	0 to 50 °C
Weight	0.32 kg

Actuator CM230-F

Supply voltage	100 to 240 V AC –15 % +10 %, 50/60 Hz
Power rating	3 VA
Torque	2 Nm
Running time for 90°	75 s
Control input signal	1-wire control or 2-wire control (3-point)
Connecting cable	3 × 0.75 mm², 1 m long
IEC protection class	II (protective insulation)
Protection level	IP 54
EC conformity	EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU
Operating temperature	–30 to 50 °C
Weight	0.185 kg

Variants

Actuator LM24A

Any attachments are to be defined with the order code of the CAV controller.

B5*

Application

Actuator LM24A-F for the min/max switching of volume flow setpoint values of mechanical self-powered volume flow controllers Type RN or EN (only up to a height of 300 mm)

Variants

B52: with auxiliary switch for capturing the end positions

Parts and characteristics

Supply voltage 24 V AC/DC
1-wire control or 2-wire control (3-point)
Mechanical stops for setting the volume flow rate setpoints
Switch for setting the direction of rotation
Positive lock connection with damper blade shaft
Release button to allow for manual operation

Commissioning

Set the mechanical stops according to the minimum and maximum volume flow rates
Change the direction of rotation if necessary, using the switch, to switch between V_min andV_max

B6*

Application

Actuator LM230A-F for the min/max switching of volume flow setpoint values of mechanical self-powered volume flow controllers Type RN or EN (only up to a height of 300 mm)

Variants

B62: with auxiliary switch for capturing the end positions

Parts and characteristics

Supply voltage 230 V AC
1-wire control or 2-wire control (3-point)
Mechanical stops for setting the volume flow rate setpoints
Switch for setting the direction of rotation
Positive lock connection with damper blade shaft
Release button to allow for manual operation

Commissioning

Set the mechanical stops according to the minimum and maximum volume flow rates
Change the direction of rotation if necessary, using the switch, to switch between V_min andV_max

B*2

Application

Auxiliary switch S2A for capturing damper blade end positions (end positions reached through actuator operation)
Volt-free contacts for signalling or activating switch functions
Two integral switches, e.g. for damper blade OPEN and damper blade CLOSED
Potentiometer for setting any switch point

E01

Application

Actuator 224-024-03-001 for min/max switching
Min/Max switching between volume flow setpoint values of mechanical self-powered CAV controllers Type VFC
Min/Max change of the damper blade positions of flow adjustment dampers Type VFR

Parts and characteristics

Supply voltage 24 V AC/DC
1-wire control or 2-wire control (3-point)
Potentiometer for setting the volume flow rate setpoints
Positive lock connection with damper blade shaft
Functional test button: Motor drives first to minimum position, then to maximum position, then returns to the set position
Indicator light: Actuator has reached setpoint, actuator in motion, actuator blocked

Commissioning

Use the potentiometer to set the minimum or maximum volume flow rate or the damper blade position

M01

Application

Actuator CM24-F for min/max switching
Min/Max switching between volume flow setpoint values of mechanical self-powered CAV controllers Type VFC
Min/Max change of the damper blade positions of flow adjustment dampers Type VFR

Parts and characteristics

Supply voltage 24 V AC/DC
1-wire control or 2-wire control (3-point)
Mechanical stops for setting the volume flow rates
Positive lock connection with damper blade shaft
Gear release magnet

Commissioning

Set the mechanical stops according to the minimum and maximum volume flow rates or the damper blade position

E02

Application

Actuator 224-230-03-002 for min/max switching
Min/Max switching between volume flow setpoint values of mechanical self-powered CAV controllers Type VFC
Min/Max change of the damper blade positions of flow adjustment dampers Type VFR

Parts and characteristics

Supply voltage 230 V AC
1-wire control or 2-wire control (3-point)
Potentiometer for setting the volume flow rate setpoints
Positive lock connection with damper blade shaft
Functional test button: Motor drives first to minimum position, then to maximum position, then returns to the set position
Indicator light: Actuator has reached setpoint, actuator in motion, actuator blocked

Commissioning

Use the potentiometer to set the minimum or maximum volume flow rate or the damper blade position

M02

Application

Actuator CM230-F for min/max switching
Min/Max switching between volume flow setpoint values of mechanical self-powered CAV controllers Type VFC
Min/Max change of the damper blade positions of flow adjustment dampers Type VFR

Parts and characteristics

Supply voltage 230 V AC
1-wire control or 2-wire control (3-point)
Mechanical stops for setting the volume flow rate setpoints
Positive lock connection with damper blade shaft
Gear release magnet

Commissioning

Set the mechanical stops according to the minimum and maximum volume flow rates or the damper blade position

Actuators for volume flow controllers Type RN or EN

Order code detail	Actuator			Auxiliary switch
Order code detail	Part number	Type	Supply voltage	Part number	Type
B50	M466DT4	LM24A-F	24 V	–	–
B52	M466DT4	LM24A-F	24 V	M536AI3	S2A
B60	M466DT5	LM230A-F	230 V	–	–
B62	M466DT5	LM230A-F	230 V	M536AI3	S2A

Actuators for volume flow controllers Type VFC and for flow adjustment dampers Type VFR

Order code detail	Part number	Type	Setpoint setting	Supply voltage
E01	A00000038358	224-024-03-001	Potentiometer	24 V
M01	M466EP4	CM24-F	Mechanical stops	24 V
E02	A00000038359	224-230-03-002	Potentiometer	230 V
M02	M466EP5	CM230-F	Mechanical stops	230 V

Electrical connection

LM24A, connecting cable core identification

1 ⊥, –: Ground, neutral
2 ~, +: Control voltage for direction of rotation 1
3 ~, +: Control voltage for direction of rotation 2

LM24A and LM24A-F

Téléchargements

Information produit

Unités de regulation

11 MB pdf

TROX SERVICES

Configurateur de produit en ligne Concevez des composants de climatisation et de ventilation facilement et rapidement

Tout en un clic Les services numériques de myTROX

TROX Easy Product Finder Plus d'infos sur l'outil de conception

En cliquant sur ce bouton, vous nous autorisez à vous offrir une expérience de navigation et d'achat de qualité sur notre site web. Ces cookies comprennent ceux qui sont nécessaires au fonctionnement du site et au contrôle de nos services et applications, ainsi que ceux qui sont utilisés uniquement à des fins statistiques, pour des paramètres de commodité ou pour afficher un contenu personnalisé. Vous pouvez décider quelles catégories vous souhaitez autoriser et vous pouvez ajuster les paramètres d'utilisation des données en fonction de vos propres besoinsS. Veuillez noter que, selon les paramètres que vous avez sélectionnés, toutes les fonctionnalités de la page peuvent ne pas être disponibles. Vous pouvez modifier votre sélection à tout moment.

NÉCESSAIRE D’UN POINT DE VUE TECHNIQUE

Ces cookies sont nécessaires au bon fonctionnement de notre site Internet et ne peuvent pas être désactivés. En règle générale, ces cookies ne sont définis qu'en réponse aux actions que vous avez entreprises, comme la définition de vos préférences de confidentialité ou la préparation de votre panier. De plus, des fonctionnalités ou supports liés à la sécurité via un webchat dédié sont intégrés, y compris tous les cookies de session de TROX définis une fois que vous vous êtes connecté en tant que client. Vous pouvez configurer votre navigateur pour bloquer ces cookies ou vous en informer. En conséquence, cependant, certaines zones du site Web peuvent ne pas fonctionner comme prévu.

STATISTIQUES ET ANALYSE DE SITE WEB

Ces cookies permettent de collecter des données à des fins de statistiques et d'analyses afin que TROX puisse mesurer les performances des sites Web visités, identifier les problèmes techniques et trouver des points de départ pour l'optimisation. Ils peuvent être définis par nous ou par des tiers dont nous utilisons les services sur nos sites. Les utilisateurs aident également à identifier, par exemple, quelles pages sont utilisées le plus fréquemment ou rarement ou comment les gens naviguent entre les pages Web. Toutes les informations utilisées par des tiers sont agrégées et anonymisées.

SERVOMOTEURS MIN/MAX

FOR CONSTANT VOLUME FLOWS WITH VMIN/VMAX SWITCHING IN AIR CONDITIONING SYSTEMS

Application

Description

Information technique

Function, Technical data

Variants

Electrical connection

Téléchargements

Information produit

Unités de regulation

TROX SERVICES

NÉCESSAIRE D’UN POINT DE VUE TECHNIQUE

STATISTIQUES ET ANALYSE DE SITE WEB

COMMODITÉ ET PERSONNALISATION

POUR LA MEILLEURE EXPÉRIENCE TROX POSSIBLE